PAGE #9
"3500" SERIES
RECOMMENDED SPARE PARTS AND OPERATING SUPPLIES
6 - # 399 - Exciter Lamp
1 - # 400 - Amplifier Pilot Lamp
6 - # 411 - Framing and Threading Lamp
6 - # 479 - 1000 watt, 115 volt Projection Lamp
1 - #1618 - 1 Pint Can Film Cement
1 - #1840 - 1 Pint Can Chain Oil
1 - #1866 - 1 Pint Can General Mechanism Oil
1 - #1872 - 1 Lb. Tube Shutter Gear Grease
1 - #1874 - 1 Pint Can Intermittent Oil
2 - #4085 - Amplifier Fuse
1 - #4301 - 6 J 7 Amplifier Tube
1 - #4310 - 5 U 4 G Amplifier Tube
1 - #4314 - 6 N 7 G Amplifier Tube
2 - #4327 - 6 L 6 G Amplifier Tube
1 - #4362 - 6 S F 5 Amplifier Tube
2 - #4453A2 - Photo Electric Cell
6 - #5819 - 2000 foot, 35mm Welded wire Reel
4 - #7262 - Ventilating Motor Brush
CONVERSIONS:
Field-Convertible for projection of Cinemascope (See Conversions - Pages 25, 26,
or Superscope Film and 27)
Field-Convertible for projection of Vistavision (See Conversions - Page 25)
Film
Field-Convertible for Arc Lamp Light Source (See Conversions - Page 14)
Field-Convertible to Model "2810" Super XD (See Conversions - Page 9)
One Model "3500" Projector is field-convertible to the Model "2810" Super XD by ordering the
following Kit Assemblies:
1 - # 8897 - Aperture Roller Kit
**1 - #10624 - D.C. Exciter Supply Installation Kit
1 - #10981 - Chain Idler Kit Assembly
*1 - #12272 - Fixed Idler Assembly
**1 - #12289 - D.C. Exciter Supply
*1 - #12415 - Intermittent-Feed Driving Chain
*1 - #12416 - Shutter Driving Chain
*1 - #12570 - Barrel Film Shutter and Fire Shutter Kit Assemblies
1 - - "3500" to "2810" Conversion Instruction Sheet.
Four items marked * recommended together.
Two items marked ** recommended together.
The above "3500" to "2810" conversions are recommended, although not absolutely essential, before
conversion to accommodate arc-lamp light source or to accommodate Cinemascope Film.